How Do Car Jumpers Work

how do car jumpers work

So you’re all set for that gruesome business presentation that’s been haunting and daunting you for the past two weeks. You’ve done your research. you’re prepared and you actually feel confident about acing the presentation. You head out of your house with head held high and you set foot in your car. You attempt to start the car but it fails to start up. You just realize that you’d left the headlights on last night after coming home from the grocery store. Now your battery’s drained out and you’re running late. You might think all’s lost but there is one way to ensure that this little set back doesn’t put a dent in your expectations of the day.

What you can do

You could jump start the car in less than 5 minutes with a car jumper like the schumacher xp2260. Jump starting is essentially a process by which you charge your car’s discharged battery with the help of jumper cables and an auxiliary power source such as the batter of another car or a portable battery or perhaps even a car jumper kit.

Once you’ve successfully managed to jump your car, its only a matter of time before your car’s alternator kicks in and begins to charge your battery up by itself.

But what if you can’t find anyone who could possibly assist you? What if you’re stranded in the middle of nowhere after a short pit stop because your car’s charging system has malfunctioned causing your battery to dry up over time? Again, there’s no need for you to let minor set backs decide how you feel throughout the day. The answer could be as simple as having a car jump starter pack like schumacher xp2260 on you at all times. A typical car jump starter kit would have the following :

1. Auxiliary power source, the car jumper.
2. Jumper cables with alligator clips.
3. Charger to charge your jumper.

How you can do it – The mechanics of a car jumper :

The car jumper works on the same principle as jumping your car with the battery of another car. Before you do anything, you’re going to have to make sure that your car is switched off entirely and that the key has been removed from ignition. Then you’ve to establish a connection between your car’s dried out battery and the car jumper via the jumper cables provided. Make sure that the connection is secure.

Precautionary steps to be taken :

Properly align the cables. Make sure that the ends do not touch hereafter. It’s okay to connect the negative cable to the negative terminal of the battery as the negative terminal of the battery is itself connected to the chassis of the car causing it to be grounded. But general practice dictates that you connect the negative cable to a part of the car that is far away from the battery and is free from connections to any electrical component.

This is because the battery, especially the older models have been known to release hydrogen gas while being recharged which is highly inflammable and even the slightest spark could trigger an explosion. However the risk is minimum and almost non existent in newer makes.

Once you’ve achieved this, turn on the jumper and wait for a few seconds before you attempt ignition. If you’re able to successfully start your car, then you’re all set.

On the off hand that your car doesn’t start, you might want to wait for 2-3 minutes of charging before attempting ignition. Holding the key in ignition for more than 5 seconds will do more harm than good.

Conclusion :

The jumper is portable and easy to transport. Meaning that it can be used to jump not just cars alone but also boats, machines, other vehicles etc. Once you’ve achieved ignition, make sure that you charge your jumper as soon as possible so that the next time you’re in need of a jump start, you’re not caught off guard.